SH-type double-suction centrifugal pump

Overview:

sh-type centrifugal pump for delivery of solid particles and the temperature does not exceed80 ℃cleaning liquid.

Performance range:

Flow rate Q: 144 ~12500m3/ h

Head H: 9 ~140m

Structure:

Sh-type level in the pump body using open, with a single-stage, double suction impeller, suction pipe and the lower half of eight and spit out without dismantling the pump tubing and cast together will be able to easily check the pump motor rotor components.

Model Description:

10 Sh G a13 Acut the number of impeller, said the order of AB

Than switch to an integer number divisible by 10

Impeller made of cast steel, T is the bronze

Single-stage double suction centrifugal pump

Inlet diameter (inches)

Seal:

Pump soft packing seal, shaft seal with the sleeve can be replaced.

Transmission:

Pump driven by motor through flexible coupling pump. From the transmission side, the pump is counterclockwise rotation (can special order supplies clockwise rotation of the pump).

Bearing and balancing devices: the bearing body (rolling or sliding bearings) mounted on the shaft at both ends. Balanced by a double suction impeller axial residual axial force from the rolling balance. Bearing with grease lubrication, bearings with oil lubrication.

Materials:

Cast iron pump body _

Cast iron seal ring _

Impeller _ cast iron, cast steel

Cast iron sleeve _

High-quality carbon steel shaft _